제품소개
Optical Communication
40Gbps ROSA
Features
- 4x10Gbps CWDM 40GBASE Ethernet
- Compatible to CFP4 Transceivers Up to 10km
- Low Insertion Loss AWG Based DeMUX
- Integrated Quad PIN-PD and TIA Arrays
- Electrical Interfaces Via Single FPCB
- RSSI (Received Signal Strength Indicator) Current Output
- Optical Interface with SMF XMD-MSA LC Receptacle
- Outline Dimension of 13.7mm x 5.1mm x 5.0mm
Applications
- 40Gbps LAN-WDM Ethernet Application
- 40Gbps CFP/CFP2/CFP4 LR4 Transceivers
Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| Center Wavelengths of Channels | λcn | 1271, 1291, 1311, 1331 | nm | ||
| RSSI Responsivity at Each Lane | R | 0.5 | 0.6 | - | A/W |
| Sensitivity for Each Lane at 28Gbps | S | - | -13.5 | -11.5 | dBm |
| Overload at Each Lane | OL | +4.5 | - | - | dBm |
| Differential Output Voltage | Vop - Von | - | 500 | - | mVp-p |
| Power Supply Voltage | Vcc | 3.14 | 3.3 | 3.36 | V |
| Power Supply Current | Icc | - | 220 | - | mA |
| Operating Temperature | Top | -5 | 25 | +75 | ℃ |
* Sensitivity & overload characteristics are measured in 10-12BER and PRBS 231 – 1 condition.
100Gbps ROSA
Features
- 4x25Gbps CWDM 100GBASE-LR4 Ethernet
- Compatible to CFP4 Transceivers Up to 10km
- Low Insertion Loss Optical Filter Based DeMUX
- Integrated Quad PIN-PD and TIA Arrays
- Electrical Interfaces Via Separate RF and DC FPCB’s
- RSSI (Received Signal Strength Indicator) Current Output
- Optical Interface with SMF XMD-MSA LC Receptacle
- Capable of 4x28Gbps Operation
- Outline Dimension of 12mm x 7.0mm x 6.5mm
Applications
- 100Gbps CWDM Ethernet Application
- 100Gbps CFP/CFP2/CFP4 LR4 Transceivers
Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| Center Wavelengths of Channels | λcn | 1271, 1291, 1311, 1331 | nm | ||
| RSSI Responsivity at Each Lane | R | 0.5 | 0.6 | - | A/W |
| Sensitivity for Each Lane at 28Gbps | S | - | -13.5 | -11.5 | dBm |
| Overload at Each Lane | OL | +4.5 | - | - | dBm |
| Differential Output Voltage | Vop - Von | - | 500 | - | mVp-p |
| Power Supply Voltage | Vcc | 3.14 | 3.3 | 3.36 | V |
| Power Supply Current | Icc | - | 220 | - | mA |
| Operating Temperature | Top | -5 | 25 | +75 | ℃ |
* Sensitivity & overload characteristics are measured in 10-12BER and PRBS 231 – 1 condition.
100Gbps LAN-WDM ROSA
Features
- 4x25Gbps LAN-WDM 100GBASE-LR4 Ethernet
- Compatible to CFP4 Transceivers Up to 10km
- Low Insertion Loss Optical Filter Based DeMUX
- Integrated Quad PIN-PD and TIA Arrays
- Electrical Interfaces Via Separate RF and DC FPCB”s
- RSSI (Received Signal Strength Indicator) Current Output
- Optical Interface with SMF XMD-MSA LC Receptacle
- Capable of 4x28Gbps Operation
- Outline Dimension of 12mm x 7.0mm x 6.5mm
Applications
- 100Gbps LAN-WDM Ethernet Application
- 100Gbps CFP/CFP2/CFP4 LR4 Transceivers
Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| Center Wavelengths of Channels | λcn | 1295.56, 1300.05, 1304.58, 1309.14 | nm | ||
| RSSI Responsivity at Each Lane | R | 0.5 | 0.6 | - | A/W |
| Sensitivity for Each Lane at 28Gbps | S | - | -13 | -11 | dBm |
| Overload at Each Lane | OL | +4.5 | - | - | dBm |
| Differential Output Voltage | Vop - Von | - | 500 | - | mVp-p |
| Power Supply Voltage | Vcc | 3.14 | 3.3 | 3.46 | V |
| Power Supply Current | Icc | - | 27 | - | mA |
| Operating Temperature | Top | -5 | 25 | +75 | ℃ |
* Sensitivity & overload characteristics are measured in 10-12BER and PRBS 223 – 1 condition.
25Gbps EML TOSA
Features
- LAN-WDM Wavelength Range: 1295.56 ~ 1309.14 nm
- EA Modulator Chip Integrated with High Power DFB-LD
- Modulation speed Up to 25.78Gbps
- TOSA Packaged with Metal Optical Bench and Single FPCB
- LC Receptacle XMD MSA Standard Size
- TEC with Thermistor Used for Temperature Controlling
Applications
- 25Gbps Transmitter Module
- 100Gbps CFP Ethernet Transceiver
Characteristics
- Coupling efficiency between fiber to EML chip: ~ 35%
- Typical TOSA output power: 6.5 ~ 8.5dBm @ 100mA
- Typical operation condition > ER: ~ 8dB, Pout: ~ 0dBm @ I = 80mA
25Gbps Eye Diagram
- Data rate: 25.78Gbps, PRBS: 231-1
- Pout: ~ 0dBm
- Extinction Ratio: ~ 8dB
1:4 WDM MUX/DeMUX
Features
- 1:4 CWDM MUX/DeMUX for CFP Transceivers
- Low Insertion Loss AWG Based DeMUX
- Low PDL (Polarization Dependent Loss)
- Low TDL (Temperature Dependent Loss)
- High Channel Isolation
- Optical Interface of Common Port with LC Receptacle
- Epoxy Free Optical Path
- Outline Dimension of 16.5mm x 6.5mm x 5.3mm
Applications
- 40/100Gbps CWDM CFP Transceiver Modules
- According to the 40Gbps IEEE 802.3ba Standard
- Optical Add/Drop Multiplexing
Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| Center Wavelengths of Channels | λcn | 1295.56, 1300.06, 1304.58, 1309.14 | nm | ||
| Channel Spacing | CS | - | 80 | - | GHz |
| Optical Bandwidth of Pass Band | PB | 2.6 | - | - | nm |
| Insertion Loss of Pass Band* | IL | - | 1.5 | 2.0 | dB |
| Pass Band Ripple | RPL | - | 0.2 | 0.3 | dB |
| Adjacent Channel Isolation | CIAD | 25 | 30 | - | dB |
| Unadjacent Channel Isolation | CIunad | 35 | 40 | - | dB |
| Operating Temperature | Top | -5 | 25 | +75 | ℃ |
* Valid over temperature range and at all polarization states with pass band, but without connector losses.
1:4 LAN-WDM Mux/DeMUX
Features
- 1:4 LAN-WDM MUX/DeMUX for CFP Transceivers
- Low Insertion Loss Thin Film Filter Based DeMUX
- Low PDL (Polarization Dependent Loss)
- Low TDL (Temperature Dependent Loss)
- High Channel Isolation
- Optical Interface of Common Port with LC Receptacle
- Epoxy Free Optical Path
- Outline Dimension of 16.5mm x 6.5mm x 5.3mm
Applications
- 100Gbps LAN-WDM CFP Transceiver Modules
- According to the 100Gbps IEEE 802.3ba Standard
- Optical Add/Drop Multiplexing
Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| Center Wavelengths of Channels | λcn | 1295.56, 1300.06, 1304.58, 1309.14 | nm | ||
| Channel Spacing | CS | - | 800 | - | GHz |
| Optical Bandwidth of Pass Band | PB | 2.6 | - | - | nm |
| Insertion Loss of Pass Band* | IL | - | 1.5 | 2.0 | dB |
| Pass Band Ripple | RPL | - | 0.2 | 0.3 | dB |
| Adjacent Channel Isolation | CIAD | 25 | 30 | - | dB |
| Unadjacent Channel Isolation | CIunad | 35 | 40 | - | dB |
| Operating Temperature | Top | -5 | 25 | +75 | ℃ |
* Valid over temperature range and at all polarization states with pass band, but without connector losses.
405nm Pigtail, Receptacle Type
Features
- Uncooled High Temperature Operation
- Low Threshold Current Laser
- Excellent Heat Dissipation Structure
- Uniform Output Beam
- MMF Pigtail or SC/PC Receptacle Type
Applications
- CTP (Computer To Plate) Printer
- Laser Bar Code Scanner
- Bio-medical Instrument
- Flow Cytometry
- Scientific Research
CHARACTERISTICS
- Threshold current: < 45mA @ CW
- Slope efficiency: ~ 1.4W/A @ CW
- Operating current: ~ 90mA @ 100mW
- Operating voltage: ~ 4.4V @ 100mW
- Peak wavelength: 400 ~ 410nm
- Operating temperature: -10 ~ 90oC
830nm Pigtail Type
Features
- 1:4 CWDM MUX/DeMUX for CFP Transceivers
- Low Insertion Loss AWG Based DeMUX
- Low PDL (Polarization Dependent Loss)
- Low TDL (Temperature Dependent Loss)
- High Channel Isolation
- Optical Interface of Common Port with LC Receptacle
- Epoxy Free Optical Path
- Outline Dimension of 16.5mm x 6.5mm x 5.3mm
Applications
- 40/100Gbps CWDM CFP Transceiver Modules
- According to the 40Gbps IEEE 802.3ba Standardr
- Optical Add/Drop Multiplexing
Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| Output Power | Po | - | 1 | - | W |
| Threshold Current | Ith | - | 250 | - | mA |
| Slope Efficiency | S.E | - | 1.0 | - | W/A |
| Operating Current | Iop | - | 1.25 | - | A |
| Operating Voltage | Vop | - | 2.7 | 3.1 | V |
| Center Wavelength | λc | 825 | 830 | 835 | nm |
| Operating Case Temperature | Tc | - | 25 | - | ℃ |
| Fiber Core Diameter | Dc | - | 105 | - | nm |
| Fiber Numerical Aperture | NA | 0.20 | 0.22 | 0.24 | |
| Fiber Length | Lf | - | 80 | - | ℃ |